Purchase All Railyard Safety Products Online
PowerDrive Standard TEFC 575V Assembly Weight 293 lbs.

4020-09 Hopper Gate Openers - Electric

PowerDrive Standard TEFC 575V Assembly Weight 293 lbs.

$12,799.00 Each

Optional Sliding Carriage to mount on Customer Supplied 6x20 W Beam

4020-11 Hopper Gate Openers - Electric

Optional Sliding Carriage to mount on Customer Supplied 6x20 W Beam

$1,037.00 Each

Gatemaster I Manual Torque Wrench Assembly Gear Reduction 18.5 to 1. Max. Output 3,200 ft/lbs. Weight 30 lbs.

4020-05 Hopper Gate Openers - Manual

Gatemaster I Manual Torque Wrench Assembly Gear Reduction 18.5 to 1. Max. Output 3,200 ft/lbs. Weight 30 lbs.

$4,029.00 Each

Gatemaster II Manual Torque Wrench Assembly 100:1 Ratio. Max. Output 3,200 ft/lbs. Weight 35 lbs.

4020-06 Hopper Gate Openers - Manual

Gatemaster II Manual Torque Wrench Assembly 100:1 Ratio. Max. Output 3,200 ft/lbs. Weight 35 lbs.

$9,053.00 Each

1" Square Tapered Drive Fitting Tool can be used with power tools to open hopper car gates. 5" long. Weight 5lbs

4024-06 Hopper Gate Openers - Other

1" Square Tapered Drive Fitting Tool can be used with power tools to open hopper car gates. 5" long. Weight 5lbs

$426.00 Each

1-1/2" Square Tapered Drive Fitting Tool can be used with power tools to open hopper car gates. 5" long. Weights 5 lbs.

4024-07 Hopper Gate Openers - Other

1-1/2" Square Tapered Drive Fitting Tool can be used with power tools to open hopper car gates. 5" long. Weights 5 lbs.

$446.00 Each

GATE-JACK Pneumatic Gate Opener Moderate Gate Opening Only 2,000 ft/lbs of output

4120-01 Hopper Gate Openers - Other

GATE-JACK Pneumatic Gate Opener Moderate Gate Opening Only 2,000 ft/lbs of output

$4,729.00 Each

Gate Turning Bar 6' Long with an angle at one end to clear side of car

4020-03 Hopper Gate Openers - Other

Gate Turning Bar 6' Long with an angle at one end to clear side of car

$192.00 Each

Ratchet Wrenc Gate Opener For easy to open car gates only. 16" long extension brings wrench out from car.

4020-04 Hopper Gate Openers - Other

Ratchet Wrenc Gate Opener For easy to open car gates only. 16" long extension brings wrench out from car.

$1,212.00 Each

CS-3X Hinged Locking Left Hand Car Stop Car Stops for flat track only and must be used in pairs. Folds away from rail to outside of track. Equipped with padlock for locking in upward/lowered position. Rails 60lbs and up. Weight 94lbs.

4016-05-L Rail Car Stops

CS-3X Hinged Locking Left Hand Car Stop Car Stops for flat track only and must be used in pairs. Folds away from rail to outside of track. Equipped with padlock for locking in upward/lowered position. Rails 60lbs and up. Weight 94lbs.

$666.00 Each

CS-3X Hinged Locking Right Hand Car Stop Car Stops for flat track only and must be used in pairs. Folds away from rail to outside of track. Equipped with padlock for locking in upward/lowered position. Rails 60lbs and up. Weight 94lbs.

4016-05-R Rail Car Stops

CS-3X Hinged Locking Right Hand Car Stop Car Stops for flat track only and must be used in pairs. Folds away from rail to outside of track. Equipped with padlock for locking in upward/lowered position. Rails 60lbs and up. Weight 94lbs.

$666.00 Each

CS-2 Self-Tightening Car Stop Car Stop is assembled on head of rail by tightening 5 bolts and driving wedge from the rear. Weight 107lbs

4016-03 Rail Car Stops

CS-2 Self-Tightening Car Stop Car Stop is assembled on head of rail by tightening 5 bolts and driving wedge from the rear. Weight 107lbs

$548.00 Each

Double Flush Rail Wheel Chock with Whack 'Em reinforced steel handles Weight 14lbs

4011-31 Wheel Chocks - Whack Em

Double Flush Rail Wheel Chock with Whack 'Em reinforced steel handles Weight 14lbs

$198.00 Each

Double Exposed Rail Wheel Chock with Whack 'Em reinforced steel handles Weight 14lbs

4011-30 Wheel Chocks - Whack Em

Double Exposed Rail Wheel Chock with Whack 'Em reinforced steel handles Weight 14lbs

$198.00 Each

Single Exposed Rail Wheel Chock with Flag Weight 16lbs

4011-32 Wheel Chocks - Whack Em

Single Exposed Rail Wheel Chock with Flag Weight 16lbs

$163.00 Each

Double Exposed Rail Wheel Chock with Flag Weight 18 lbs.

4011-34 Wheel Chocks - Whack Em

Double Exposed Rail Wheel Chock with Flag Weight 18 lbs.

$245.00 Each

Double Flush Rail Rail Wheel Chock with Flag Weight 18 lbs.

4011-35 Wheel Chocks - Whack Em

Double Flush Rail Rail Wheel Chock with Flag Weight 18 lbs.

$245.00 Each

Left Chocking Skid for Flush Rail Tamper-proof chock for freight cars, idling locomotives, or mine cars on flat track. Low clearance, 4" above top of rail. Weight 13 lbs.

4016-22-L Rail Skids

Left Chocking Skid for Flush Rail Tamper-proof chock for freight cars, idling locomotives, or mine cars on flat track. Low clearance, 4" above top of rail. Weight 13 lbs.

$240.00 Each

Right Chocking Rail Skid for Flush Rail Tamper-proof chock for freight cars, idling locomotives, or mine cars on flat track. Low clearance, 4" above top of rail. Weight 13 lbs

4016-22-R Rail Skids

Right Chocking Rail Skid for Flush Rail Tamper-proof chock for freight cars, idling locomotives, or mine cars on flat track. Low clearance, 4" above top of rail. Weight 13 lbs

$240.00 Each

Nine Lives Wheel Wedge Moulded in a special grade of urethane, the wedge is 10” long x 2-1/2” high x 3-1/4” wide. 2 lbs

4011-18 Rail Chocks

Nine Lives Wheel Wedge Moulded in a special grade of urethane, the wedge is 10” long x 2-1/2” high x 3-1/4” wide. 2 lbs

$104.00 Each

Lighted hinged spiked steel sign holder plate. Includes hinged spiked steel sign holder, custom sign plate and solar light. Blue, Red, Amber or Clear lens available.

4015-93 Signs - Holders

Lighted hinged spiked steel sign holder plate. Includes hinged spiked steel sign holder, custom sign plate and solar light. Blue, Red, Amber or Clear lens available.

$635.00 Each

Safety Products
BEST SELLER
6” D2000 Style 80 Aluminum Swivel Joint with Standard Bearings. Grease Type: Standard - Dura-Lith Inlet Connection: Aluminum TTMA Flange Outlet Connection: Aluminum TTMA Flange No Seals.

D2806DLA5A5SN Swivel Joints - Style 80

6” D2000 Style 80 Aluminum Swivel Joint with Standard Bearings. Grease Type: Standard - Dura-Lith Inlet Connection: Aluminum TTMA Flange Outlet Connection: Aluminum TTMA Flange No Seals.

$16,447.00 Each

Aldon® Aluminum Wheel Chock W/Sign for Truck and Trailer Block Width 7" Length 10 3/4" Height 8"Weight 12 lbs. For maximum tire dia. 30" Powder-coated safety yellow

4012-02 Wheel Chocks

Aldon® Aluminum Wheel Chock W/Sign for Truck and Trailer Block Width 7" Length 10 3/4" Height 8"Weight 12 lbs. For maximum tire dia. 30" Powder-coated safety yellow

$175.00 Each

6” D2000 Style 70 Aluminum Swivel Joint with Standard Bearings. Grease Type: Standard - Dura-Lith Inlet Connection: Aluminum FNPT Outlet Connection: Aluminum FNPT Buna Seals.

D2706DLA3A3SB Swivel Joints - Style 70

6” D2000 Style 70 Aluminum Swivel Joint with Standard Bearings. Grease Type: Standard - Dura-Lith Inlet Connection: Aluminum FNPT Outlet Connection: Aluminum FNPT Buna Seals.

$11,626.00 Each